LWD仪器临界电压数据读取分析与解决

锂电池是LWD仪器正常工作的动力来源,是仪器的心脏。仪器出井后,需要在井口读取数据,当锂电池的电量接近耗尽时,会导致数据读取失败的问题。该问题处理不当,会造成长期占用井口,影响钻井时效,严重时还可能会因短路造成昂贵的LWD仪器损坏。锂电池的临界电压问题暴露了该仪器的设计缺陷,在此通过技术方法充分利用INSITE系统本身提供的功能,绕过其设计缺陷将问题解决。     

Low voltage operating organic light emitting transistors with efficient charge blocking layer

Charge injection/blocking layers play important roles in the performances of organic electronic devices. Their incorporation into organic light emitting transistors has been limitted, due to generally high operating voltages (above 60 V) of these devices. In this work, two hole blocking molecules are integrated into tris-(8-hydroxyquinoline) aluminum (Alq₃) based light emitting transistors under operating voltage as low as 5 V. The effects of hole blocking and electron injection are decoupled through the differences in the energy levels. Significantly improved optical performance is achieved with the molecule of suitable energy level for electron injection. Surprisingly, a decreased performance is observed in the case of another hole blocking molecule evidencing that charge injection overweighs charge blocking in this device architecture.     

仪器仪表产品脉冲耐压试验要求和保护器件的选择

仪器仪表产品的脉冲耐压试验是产品型式试验、例行试验中的基本内容。通过对GB4793.1标准的整理,归纳了仪器仪表产品的脉冲耐压试验要求。通过对试验方法和设备特性的梳理,总结了特性参数,并介绍了应对脉冲耐压试验可采取的保护器件的类别及选用方法。     

岳纸PM8 Optisizer生产实践

Optisizer在生产实践过程中的维护和操作控制关系到其是否正常稳定运行,本文主要介绍了施胶辊更换后的调试和断纸后的操作注意事项,以及运行过程中存在的亮线问题的一些探讨。     

A cell-based smoothed radial point interpolation method with virtual nodes for three-dimensional mid-frequency acoustic problems

It is well known that the finite element method (FEM) encounters dispersion errors in coping with mid-frequency acoustic problems due to its “overly stiff” nature. By introducing the generalized gradient smoothing technique and the idea of condensed shape functions with virtual nodes, a cell-based smoothed radial point interpolation method is proposed to solve the Helmholtz equation for the purpose of reducing dispersion errors. With the properly selected virtual nodes, the proposed method can provide a close-to-exact stiffness of continuum, leading to a conspicuous decrease in dispersion errors and a significant improvement in accuracy. Numerical examples are examined using the present method by comparing with both the traditional FEM using four-node tetrahedral elements (FEM-T4) and the FEM model using eight-node hexahedral elements with modified integration rules (MIR-H8). The present cell-based smoothed radial point interpolation method has been demonstrated to possess a number of superiorities, including the automatically generated tetrahedral background mesh, high computational efficiency, and insensitivity to mesh distortion, which make the method a good potential for practical analysis of acoustic problems.     

Unconditional stability and error estimates of the modified characteristics FEMs for the time-dependent incompressible MHD equations

This paper focuses on the unconditional stability and convergence of characteristics type methods for the time-dependent incompressible MHD equations. For this purpose, we introduce a new characteristics time-discrete system. The optimal error estimates in $L^2$ and $H^1$ norms for the typical modified characteristics finite element method unconditionally can be deduced, while the whole previous works require certain time-step restrictions. Some numerical experiments document performance of the characteristics type methods for the time-dependent incompressible MHD equations.     

Numerical analysis of history-dependent hemivariational inequalities and applications to viscoelastic contact problems with normal penetration

In this paper numerical approximation of history-dependent hemivariational inequalities with constraint is considered, and corresponding Céa’s type inequality is derived for error estimate. For a viscoelastic contact problem with normal penetration, an optimal order error estimate is obtained for the linear element method. A numerical experiment for the contact problem is reported which provides numerical evidence of the convergence order predicted by the theoretical analysis.     

Topology optimization for crashworthiness of thin-walled structures under axial crash considering nonlinear plastic buckling and locations of plastic hinges

Although topology optimization is established for linear static problems, more effort is required for solving nonlinear plastic problems. A new topology optimization approach with equivalent static loads (ESLs) is suggested to find the optimum topologies and locations of plastic hinges of thin-walled crash boxes by considering crash-induced deformation, the main crash energy-absorbing mechanism. Together with finite element method crashworthiness analyses, considering all nonlinearities with rate-dependent plasticity, the method was developed using an appropriate time-incremental scheme of ESLs without removing any high values of loads. Analyses show that the crash boxes with optimum topologies have energy-absorbing capabilities equivalent to the original structure. The proposed method is evaluated for two crashes: a crash box at low speed and a double cell subjected to high-speed collision. The results indicate that this method captures nonlinear crushing behaviours and accurate locations of plastic hinges where, if proper reinforcements are made, energy absorption can be enhanced.     

M-estimator based Chinese Remainder Theorem with few remainders using a Kroenecker product based mapping vector

The Chinese Remainder Theorem (CRT) explains how to estimate an integer-valued number from the knowledge of the remainders obtained by dividing such unknown integer by co-prime integers. As an algebraic theorem, CRT is the basis for several techniques concerning data processing. For instance, considering a single-tone signal whose frequency value is above the sampling rate, the respective peak in the DFT informs the impinging frequency value modulo the sampling rate. CRT is nevertheless sensitive to errors in the remainders, and many efforts have been developed in order to improve its robustness. In this paper, we propose a technique to estimate real-valued numbers by means of CRT, employing for this goal a Kroenecker based M-Estimation (ME), specially suitable for CRT systems with low number of remainders. Since ME schemes are in general computationally expensive, we propose a mapping vector obtained via Kroenecker products which considerably reduces the computational complexity. Furthermore, our proposed technique enhances the probability of estimating an unknown number accurately even when the errors in the remainders surpass 1/4 of the greatest common divisor of all moduli. We also provide a version of the mapping vectors based on tensorial n-mode products, delivering in the end the same information of the original method. Our approach outperforms the state-of-the-art CRT methods not only in terms of percentage of successful estimations but also in terms of smaller average error.